How To Remove Tissot Prs 516 Strap?

How to Remove a Tissot PRS 516 Strap: A Step-by-Step Guide

The Tissot PRS 516 is a popular watch known for its sporty design and high-quality craftsmanship. Whether you need to replace a worn-out strap or simply want to change the look of your watch, removing the strap is a straightforward process. This guide will walk you through the steps to safely and effectively remove the strap from your Tissot PRS 516.

Tools You Will Need

Before you begin, gather the following tools:

- Spring bar tool or a small flathead screwdriver

- Soft cloth or microfiber towel

- Tweezers (optional)

- Replacement strap (if applicable)

Step-by-Step Instructions

Step 1: Prepare Your Workspace

Find a clean, flat surface to work on. Lay down a soft cloth or microfiber towel to protect your watch from scratches and to catch any small parts that may fall during the process.

Step 2: Position the Watch

Place the watch face down on the cloth, ensuring that the back of the watch is facing up. This position will give you easy access to the spring bars that hold the strap in place.

Step 3: Locate the Spring Bars

Examine the area where the strap connects to the watch case. You will see small metal bars, known as spring bars, that secure the strap to the watch. These bars are located inside the lugs of the watch case.

Step 4: Insert the Spring Bar Tool

Take your spring bar tool or small flathead screwdriver and carefully insert it between the strap and the lug. You should feel the tool make contact with the spring bar.

Step 5: Compress the Spring Bar

Gently press the tool against the spring bar to compress it. The spring bar is designed to be flexible, so it will compress inward when pressure is applied. Be careful not to apply too much force, as this could damage the spring bar or the watch case.

Step 6: Release the Spring Bar

While keeping the spring bar compressed, carefully pull the strap away from the watch case. The spring bar should release from the lug, allowing you to remove the strap. If the spring bar does not release easily, try adjusting the angle of the tool and applying gentle pressure until it does.

Step 7: Repeat for the Other Side

Once you have successfully removed one side of the strap, repeat the process for the other side. Follow the same steps to compress and release the spring bar, then remove the strap from the watch case.

Step 8: Inspect the Spring Bars

After removing the strap, take a moment to inspect the spring bars for any signs of wear or damage. If the spring bars are bent or damaged, it is a good idea to replace them with new ones to ensure the security of your new strap.

Tips for Reattaching a New Strap

If you are replacing the strap with a new one, follow these additional steps to attach the new strap to your Tissot PRS 516:

1. Insert the Spring Bars: Place the spring bars into the holes on each end of the new strap.

2. Align the Strap: Position the new strap between the lugs of the watch case, ensuring that the spring bars are aligned with the holes in the lugs.

3. Compress the Spring Bars: Use the spring bar tool to compress one end of the spring bar and insert it into the hole in the lug. Repeat for the other end of the spring bar.

4. Secure the Strap: Once both ends of the spring bar are inserted into the holes, gently pull on the strap to ensure it is securely attached to the watch case.

Removing the strap from your Tissot PRS 516 is a simple process that can be done with a few basic tools and a bit of patience. By following the steps outlined in this guide, you can safely remove and replace the strap, giving your watch a fresh new look or simply maintaining its functionality. Whether you are a watch enthusiast or a casual wearer, knowing how to change the strap on your Tissot PRS 516 can enhance your overall experience with this stylish timepiece.